Stock Name: 希荻微
Stock Code: 688173

All
  • All
  • Product Management
  • News Information
  • Introduction Content
  • Corporate Outlets
  • Frequently Asked Questions
  • Corporate Video
  • Corporate Album

Stock Name: 希荻微
Stock Code: 688173

All
  • All
  • Product Management
  • News Information
  • Introduction Content
  • Corporate Outlets
  • Frequently Asked Questions
  • Corporate Video
  • Corporate Album

Boost converter with a wide input voltage range of 4.5–40V


CX8022

+
  • CX8022.png

Message

The CX8022 is a high-performance boost converter with a wide input voltage range of 4.5–40V. When the CX8022 gets bias from the output voltage, the chip can also work at an input voltage of 1V after startup. The switching frequency can be programmed by a resistor on the FREQ pin. A constant frequency current control architecture allows the device to synchronize to an external clock on the SYNC/SPS pin. To optimize light load efficiency, the device provides three light load operation modes—burst mode, pulse skipping mode, and continuous inductor current mode. These modes are controlled by the MODE pin. CX8022 features spread spectrum operation to reduce the peaks of the radiated and conducted EMI noise and make it easier for the system to comply with EMI standards. This operation mode can be enabled by typing the SYNC/SPS pin to VCC. A separate supply pin SUP is available to power the internal LDO that supplies to VCC. This feature provides one more option to reduce power loss and improve overall efficiency. CX8022 is available in a 32-pin 5x5 mm QFN package.

Product Brief Datasheet

  • Features
  • parameter
  • Application
  • Related
    • Commodity name: CX8022
    • 产品名称: Boost converter with a wide input voltage range of 4.5–40V
    • 产品简介: The CX8022 is a high-performance boost converter with a wide input voltage range of 4.5–40V. When the CX8022 gets bias from the output voltage, the chip can also work at an input voltage of 1V after startup. The switching frequency can be programmed by a resistor on the FREQ pin. A constant frequency current control architecture allows the device to synchronize to an external clock on the SYNC/SPS pin. To optimize light load efficiency, the device provides three light load operation modes—burst mode, pulse skipping mode, and continuous inductor current mode. These modes are controlled by the MODE pin. CX8022 features spread spectrum operation to reduce the peaks of the radiated and conducted EMI noise and make it easier for the system to comply with EMI standards. This operation mode can be enabled by typing the SYNC/SPS pin to VCC. A separate supply pin SUP is available to power the internal LDO that supplies to VCC. This feature provides one more option to reduce power loss and improve overall efficiency. CX8022 is available in a 32-pin 5x5 mm QFN package.

     

    • Synchronous Boost Operation with High Efficiency
    • Wide Supply Voltage Range from 4.5V to 40V
    • Output Voltage Up to 40V
    • Low Operating IQ of 14µA
    • Low Shutdown IQ with 1.2µA
    • Built-in 4.5mΩ high-side MOSFET and 4.5mΩ low-side MOSFET
    • 100% Duty Cycle Pass-Through Mode for Synchronous MOSFET
    • Programmable Switching  Frequency from 100 kHz to 3 MHz
    • Sync to External Clock from 100 kHz to 3 MHz
    • Spread Spectrum for Low EMI
    • Selectable Continuous  Inductor Current, Burst, or Pulse Skipping Mode at Light Loads
    • Thermally Enhanced 32-pin 5mm x 5mm QFN

     

    • Subtitle

      • Subtitle
  •  

中企跨境-全域组件 2.0 制作前进入CSS配置样式

CSS / JS 文件放置地