Halo Microelectronics’ Wholly-Owned Subsidiary Chengxin Micro Launches the CX8901X 65W High-Voltage Fast-Charging Complete Board Solution, Breaking Through the Traditional 5V Slow-Charging Bottleneck
November 16, 2026
Halo Microelectronics’ wholly-owned subsidiary, Shenzhen Chengxin Micro Technology Co., Ltd. (“Chengxin Micro”), has officially launched the CX8901X-PD65W, an integrated high-voltage fast-charging complete board solution. Targeting high-voltage lithium battery scenarios such as 48V/60V/72V lithium-powered two-wheelers and outdoor energy storage, the solution achieves a 30–120V wide-range DC input and 65W PD/PPS high-power output, with built-in output over-current, short-circuit, and over-temperature protection. It directly addresses the pain points of the factory-standard 5V/2A slow charging as well as third-party modules with insufficient voltage tolerance that are prone to breakdown.
Industry Pain Points and Market Opportunities:
Lithium-powered two-wheelers now cover mainstream mobility scenarios such as commuting and food delivery, with 48V, 60V, and 72V high-voltage platforms having become the industry standard, while outdoor energy storage devices are simultaneously entering millions of households. However, the built-in USB ports of the vast majority of vehicles remain locked at the 10W (5V/2A) specification — adequate for emergency top-ups for phones, yet far from sufficient for charging tablets and laptops rated at 45W or above. Third-party aftermarket fast-charging modules generally suffer from two major flaws: their voltage tolerance is mostly below 30V, so the transient high-voltage spikes generated when batteries are plugged in or unplugged can easily cause chip breakdown; and their full-load power is generally below 45W, falling short of laptop-level fast-charging demands.
According to relevant data, global electric two-wheeler shipments in 2025 totaled approximately 120 million units, up 14.5% year-on-year, with a market size of USD 62–68.5 billion. Of this, China shipped 68 million units, accounting for more than half of the global share; Europe and the Americas represent mature, high-premium markets with annual growth sustained at 18%–21%; and Southeast Asia and India have surpassed 30% growth, making them the industry's core sources of incremental growth ahead. With lithium battery penetration approaching 70% and vehicle voltage platforms continuing to climb, high-power on-board fast charging is shifting from an optional feature to standard equipment.
Against this backdrop, the Chengxin Micro CX8901X solution has arrived — leveraging its combined strengths of 120V high voltage tolerance, 65W high power, and multi-protocol compatibility, it provides a mature, easy-to-mass-produce fast-charging solution for electric two-wheelers and high-voltage energy storage scenarios.
01 Product Overview
The CX8901X-PD65W is an integrated DC-DC fast-charging complete board solution built from Chengxin Micro's self-developed CX8901B high-voltage buck controller working in concert with the CX2919C fast-charging protocol chip. The core controller, the CX8901X, is a switching buck DC-DC controller that supports an ultra-wide 10–120V input voltage range. It comes in an ESOP-8L package with fixed 100kHz PWM control and, paired with an external MOSFET, delivers output currents above 10A, with soft-start, output short-circuit hiccup protection, cycle-by-cycle current limiting, and over-temperature protection integrated on-chip. In this complete board solution, the main controller handles the high-voltage power conversion while the downstream protocol chip completes the low-voltage PD fast-charging output, yielding a clean circuit architecture with minimal peripheral components. The solution adopts a DC-DC buck topology, using high-speed switch chopping and inductive energy storage to convert high-voltage DC to low-voltage DC with high efficiency, low heat generation, and support for wide input-output voltage differentials — giving it distinct advantages in high-power step-down applications.

02 Key Features
- Wide-voltage tolerance, transient surge immunity: The solution supports a 30–120V wide-range DC input, with a 100V/47μF high-voltage electrolytic capacitor at the input stage that fully absorbs the transient high-voltage surges generated when two-wheeler batteries are plugged in or unplugged, preventing ordinary on-board modules from being damaged due to insufficient voltage tolerance.
- 65W multi-protocol PD output: The output side is a single Type-C port offering five fixed voltage levels — 5V/3A, 9V/3A, 12V/3A, 15V/3A, and 20V/3.25A — plus a 5–21V/3A PPS wide-range level; it is compatible with mainstream fast-charging protocols including PD 3.0, PPS, QC2.0/3.0, FCP, AFC, and Apple 2.4A.
- Compact size and partitioned heat dissipation: The complete board measures approximately 59.6×33.2mm and weighs about 20g. The PCB adopts a partitioned, isolated layout separating high- and low-voltage sections; the core area on the back side features large solder-mask openings with exposed copper evenly coated with solder, and three independent copper heat-dissipation zones correspond respectively to the power MOSFET and the inductor power loop, preventing heat from accumulating on high-power components.
- Multiple safety protections: The solution integrates multiple safety mechanisms — output over-current protection, short-circuit protection, and over-temperature protection — ensuring stable, reliable long-term operation and safe usage in high-voltage on-board charging scenarios.
03 Solution Highlights
The Chengxin Micro CX8901X-PD65W was created for the high-voltage fast-charging scenarios of 48V/60V/72V lithium-powered two-wheelers and outdoor energy storage. Today, most factory-installed on-board interfaces on two-wheelers offer only 5V/2A slow charging, while third-party on-board fast-charging modules generally lack sufficient voltage tolerance — the transient high voltage from battery plug/unplug events can easily break down the power chips — and their full-load power is mostly below 45W, making it difficult to charge laptops and similar devices at full speed. This solution pairs the CX8901B high-voltage buck master controller with the CX2919C protocol chip to achieve a 30–120V wide-range DC input and 65W PD/PPS high-power output. The 100V-class high-voltage electrolytic capacitor at the input provides ample voltage-tolerance margin, and compatibility with mainstream fast-charging protocols — PD 3.0, PPS, QC, FCP, AFC, and Apple 2.4A — covers a wide range of devices including phones, tablets, and laptops. With its compact overall size, minimal peripherals, and partitioned heat dissipation between high- and low-voltage sections, the solution combines wide-range voltage tolerance, high-power output, multi-device compatibility, and high integration — a mature, mass-production-ready power solution for on-board high-voltage fast charging.
04 Application Scenarios
The solution is applicable to on-board USB fast charging for electric two-wheelers, power supply for outdoor energy storage devices, motorcycle converters, industrial high-voltage non-isolated DC-DC, and other scenarios. With global electric two-wheeler shipments reaching approximately 120 million units in 2025, up 14.5% year-on-year, and vehicle voltage platforms continuing to climb, high-power on-board fast charging is shifting from optional to standard. Thanks to its clean circuit architecture and minimal peripheral components, the CX8901X makes it easy for customers to rapidly complete product development and volume production.
About Halo Microelectronics
Halo Microelectronics Co., Ltd. (stock code: 688173) is a leading domestic analog chip manufacturer and a national “Little Giant” enterprise specializing in niche fields. It focuses on developing analog and power management integrated circuits, committed to providing customers with a full range of analog chip product lines covering diverse end applications, enabling global high-efficiency smart system applications. Since 2012, Halo Microelectronics has been driving innovation in mobile, IoT, automotive, and industrial power systems, building high-performance product lines capable of competing with international analog chip leaders. The company has earned high recognition from numerous mainstream customers at home and abroad, achieving deep integration between scientific and technological achievements and industry, and providing customers with high-performance, highly reliable analog integrated circuit products and solutions. For more information, please visit: http://www.halomicro.cn.
About Halo Microelectronics
Halo Microelectronics(Stock Code: 688173) develops analog and power management integrated circuits enabling energy-efficient smart systems. Since 2012, Halo Microelectronics has been driving innovation in Mobile, IoT, and Automotive systems. Find out more at: http://www.halomicro.com.
CSS / JS 文件放置地